Product informations - PNZ-BARRIER-PRIMER
against coloured wood and cork components showing through, for interior and
exterior, solvent-free water-based, (colourless, transparent)
Properties:
PNZ-ISOLIER-GRUND (PNZ-BARRIER-PRIMER) is a solvent-free, water-based sealant
for subsequent coating with PNZ PRODUCTS, especially light coloured coats used
for coverage.
PNZ-ISOLIER-GRUND is weatherproof, elastic, moisture regulating primer for all
interior and exterior woods as well as cork. PNZ-ISOLIER-GRUND prevents wood
and cork components from showing through, especially teak, red cedar, oak, larch
and cork as well as pressure treated wood.
Also suitable for sealing nicotine, grease, rust or water patches.
Areas of use:
All load-bearing wood and cork surfaces, chipboards, plaster and masonry. May
be coated with PNZ-HOLZ-LASUR lösemittelfrei (PNZ-WOOD-VARNISH solvent-free),
PNZ-HOLZ-WACHS (PNZ-WOOD-WAX) or with conventional wall paint or similar.
Usage:
Completely remove dirt and old paints. Wood must be dry, clean and free of grease.
If the wood is to be protected against blue mould and rot, this treatment should
be carried out beforehand with PNZ-IMPRÄGNIERGRUNG (PNZ-IMPREGNATION-PRIMER).
Stir PNZ-ISOLIER-GRUND well before use; apply with a brush or roller.
Some surfaces may require a second coat
(test application recommended).
Drying time after the barrier primer coat: 1 - 2 hours.
May be painted over the next day, e.g. with PNZ-HOLZ-LASUR (PNZ-WOOD-VARNISH).
The working temperature should be at least + 8°C.
Coverage:
1 litre is sufficient for approx. 12 m2 per coat.
Storage:
Dry, cool - but frost-free - and well sealed.
Cleaning:
Clean tools with soap and water.
Contents:
Water, shellac, colophonium, damar, natural latex, methylcellulose, borax.
Container sizes:
0.75 litres, 2.5 litres, 10 litres, and larger.
|
