Product informations - PNZ-STRIPPER
Properties:
To remove single component coats, such as emulsion, latex paint, synthetic resin, acrylic, alkyd and styrene paints, oil paints and NC paints. Also safely and thoroughly removes multiple paint coats on wood-chip wallpaper, adhesive and foam carpet backing remnants.
.
- Free from CFCs, aromatic compounds, acids and alkalis.
- Contains no aggressive solvents; hence also suitable for sensitive soft and hard woods (no subsequent darkening).
- Does not dry even after a few hours and therefore has excellent penetration, allowing removal of several paint layers over a large area in a single operation.
- May also be applied to vertical surfaces.
Areas of use:
All interior and exterior woods, as well as mineral surfaces.
Usage:
PNZ-ABBEIZER (PNZ-STRIPPER) is relatively simple to use. The material is applied with a brush or scrubber (natural bristle) evenly over the surface to be treated. Allow at least ˝ hour (the longer the better) to penetrate. Remains effective and moist up to 48 hours. Once all paint layers have been dissolved, remove with a scraper or rinse off with a strong water jet or thoroughly wash off with a brush and water. Check the adhesion of the surface prior to recoating.
Ensure sufficient ventilation indoors.
Usage:
Temperature for use: 10 to 25°C
Storage:
May be kept at least 1 year in a well-sealed container. Store in a cool and frost-free place.
Cleaning:
Clean tools with water.
Waste disposal:
According to local authority regulations for chemical waste.
Note:
Irritates eyes and skin. Avoid direct contact. Rinse with clear water if in contact with skin or eyes. We recommend wearing gloves during use. Do not breath vapours and only use in well-ventilated areas. In the case of swallowing, obtain medical assistance immediately and show the package and labelling. Keep out of reach of children.
Keep away from food, drink and feedstuffs.
UBA no. 05200305, GISBAU code: M-AB20
Contents:
Contains esters and carboxylic acid derivatives, < 5% non-ionic tensides
Container sizes:
0.75 litres, 2.5 litres, 10 litres, and larger
|
