Product informations - PNZ-WOOD-FILLER-SOLUTION
Joint-filler-solution for wood floors and parquet floors
Properties:
- good binding and adhesive strength ? quick drying ? extreme hardness ? easy to sand ? simple application ? low shrinkage in the joint on drying ? coatable with all PNZ products.
Areas of use:
PNZ-HOLZKITTLÖSUNG (PNZ-WOOD-FILLER-SOLUTION) serves as a bonding agent for wood flour or sanding dust, which must be wax and paint free. For the initial filling of parquet and wooden floors and to seal joints (ideally 100 or 120 sanding dust).
Usage:
PNZ-HOLZKITTLÖSUNG is mixed with wood flour or sanding dust (2nd or 3rd sanding, 100/120 grain) into a homogenous, easily workable paste and then worked into the joints with the PNZ-SPACHTEL (PNZ-TROWEL). The trowel application should be carried out such that only the joints are filled as far as possible. Subsequent light sanding is essential. Use PNZ-HOLZKITTLÖSUNG undiluted. If the trowel paste is too thick, thin with PNZ-HOLZKITTLÖSUNG. The made up paste in its normal layer thickness may be sanded after approx. 10-15 minutes. The stated drying times are based on normal conditions (+20°C and 55% rel. humidity).
The room/surface and PNZ-HOLZKITTLÖSUNG should not be below 15°C when applying.
Coverage:
40 to 100g/m2 dependent on the size of the joints. Apply as little as possible.
Storage:
Storage period of 1 year in the unopened original container. Opened containers should be well closed and used promptly. Cool and frost-free.
Cleaning:
PNZ-SPEZIALVERDÜNNUNG (PNZ-SPECIAL-THINNER). Clean tools immediately after use with newspaper or similar paper.
Note:
VbF (German regulations on combustible liquids): A I
Contents:
Copolymerisat - nitrocellulose
Container sizes:
1 litres, 5 litres and larger.
|
