PNZ Object Oil evolution

Application/Use

• Surfaces has to be clean, dry and free of dust and frost.
• The untreated wood must be finely sanded.
• Processing temperature (incl. drying) above + 8 °C. Wood humidity <18%. Air humidity <60%.
• Prior treatment with Anti-Yellowing Finish prevents the natural darkening of the wood.
• Sand renovated wooden floors working towards a finer grit from 60 to 120 with a micro-mesh sandpaper and finely sand new, raw wood using only the 120 grit.
• Drying takes at least 3 days. Protect against exposure to water during this time.
• Works differently depending on surface characteristics. Apply a trial coat first.
• Stir contents well before and during use.
• If possible, apply once on all sides before assembly.
• Drying time depends on temperature and air humidity.
• Touch dry after approximately 4-5 hours, full hardening after 8-10 days. Protect against moisture during this period.

Apply Object Oil evolution wet-on-wet and if necessary keep rolling until it stays wet on the entire surface and the wood absorbs no more oil (depending on the kind of wood up to 60 minutes). Then collect excess oil using a paint scraper or rubber wiper and immediately use a beige pad and polishing machine to rub completely in. The entire surface has has to appear dry. Use a beige pad for areas the polishing machine can't reach, like edges, corners, radiators, etc. Avoid oil residue. The residue dries extremely slowly and stays sticky for a long time. If needed, apply a second coat just like the first. Apply second coat after 8-12 hours. After letting dry for approximately 24 hours use a white pad to polish.