I agree
Our website uses cookies to help provide you with the best experience we can. By continuing to use the website, you agree to the use of cookies. For more information about cookies, please visit our privacy policy.

For indoors

Indoors healthy living is the top priority. That is why all our products are tested and certified externally.
Gently beautify your wood indoors
PNZ Floor Varnish

Order PNZ Floor Varnish Online

Order Online

PNZ Floor Varnish

Durable refresher coat for your parquet, cork and wood indoors. Sustainably produced with regional raw materials.

Suitable for

Refurbishment of parquet, cork and wooden floors as well as stairs. Limited use with exotic wood with low oil contents (trial coat). Floor Varnish is nearly odorless, low in harmful substances and so it is environmentally friendly. Floor Varnish is durable and offers protection against moisture and many household chemicals.

Color Tones

  • PNZ Floor Varnish - glossy

    glossy

  • PNZ Floor Varnish - satin-matt

    satin-matt

Product Characteristics
Consumption

Application by paint scraper approximately 70 g/m² per application. By roller or brush approximately 100-120 g/m² per application. Complete application at least 360g/m².

Storage

Cool, but frost free.

Cleaning

Clean tools with warm water and soap immediately after use.

Contents

Water, acrylates, polyurethane, glycols, auxiliary dryer, in-can preservatives (1,2-benzisothiazol-3(2H)-one (BIT) / sodium pyrithione; advice for isothiazolinones allergics +49 (0)8465-173825).

Important notices

Contains 1,2-Benzisothiazolin-3-one. May produce an allergic reaction. To avoid skin contact use suitable gloves (nitrile). Wear a dust mask when sanding. Safety data sheet available on request. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read carefully and follow all instructions. When using multiple containers with different batch numbers mix them together in a bigger container. Dispose of contents / container according to local / regional / national / international guidelines. ASN: 080112. EU limit for this product (A/e): 130 g/l. This product contains a maximum of 80 g/l VOC.

Usage and Application
Application/Use
  • Final sanding of the wooden surface before priming with grit 120.
  • The substrate has to be completely clean.
  • Processing temperature not below + 18 °C, not above + 30 °C.
  • Works differently depending on surface characteristics. Apply a trial coat first.
  • Stir contents well before and during use.
  • Pay attention to potential side bonding.
  • Can be used as primer and top coat.
  • At the earliest apply 2 days after installation.

Priming: When using a paint scraper apply twice using to spread evenly, then let dry for approximately 1 hour. When using roller or brush apply once, then let dry for approximately 2 hours. Do not sand after priming. Top coat: Apply 2-3 times by roller or brush. Sand gently with grit 120 or 150 prior to the final application. Let dry for approximately 2-4 hours between each coat. Can be carefully walked on after approximately 8 hours. Final hardness and full robustness is reached after approximately 10 days. Drying period assumes normal conditions (20 °C and 55% relative air humidity). Higher humidity and lower temperature can delay drying. Ventilate well (no draft).

Gently beautify your wood indoors

Product Highlights

  • Environmentally friendly sealant
  • water-based
  • for parquet, cork and wooden floors
  • durable and waterproof

Color Tones

  • PNZ Floor Varnish - glossy

    glossy

  • PNZ Floor Varnish - satin-matt

    satin-matt