I agree
Our website uses cookies to help provide you with the best experience we can. By continuing to use the website, you agree to the use of cookies. For more information about cookies, please visit our privacy policy.

For outdoors

Special products for protection, care and beautification of wood outdoors.
Durable wood protection for outdoors.

PNZ Impregnation Primer W219

Solvent-free impregnating primer. Effective against blue stain, decay and pest infestation.

Suitable for

Ready-to-use, aqueous wood impregnation for private, commercial and industrial use for the protection of wood against wood-destroying and wood-discoloring fungi. Only for use on woods without ground contact such as windows, doors, facade cladding, fences, roof dormers and carports. Treated wood may only be used indoors for window frames and exterior doors. Not to be used for woods with permanent ground or water contact.

Product Characteristics
Consumption

Approximately 180–220 ml/m² in 1–2 steps, meaning 1 liter of Impregnation Primer W219 is enough for approximately 4–6 m², depending on the kind of wood and surface (planed or rough-sawn). Corrugated wood can increase consumption (factor 2–3). Lower consumption affects durability of the coat.

Storage

Cool, but frost free. Can be stored in unopened, original container until: See yellow label on bottom.

Cleaning

Clean tools with warm water and soap immediately after use.

Contents

Water, oil-alkyd, additives, active ingredients: 100 g contain 0.75 g IPBC (3-iodo-2-propynylbutylcarbamate), 1.0 g 3-butoxy-2-propanol, form: liquid (reaction mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (CIT/MIT); advice for isothiazolinone allergy sufferers +49 (0)8465-173825)

Important notices

Harmful to aquatic life with long-lasting effects. Contains mixture from 5-chloro-2-methyl-2H-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1), 3-iodo-2-propynyl butylcarbamate. May produce an allergic reaction. To avoid skin contact use suitable gloves (nitrile). Wear a dust mask when sanding. Safety data sheet available on request. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read carefully and follow all instructions. Avoid release to the environment. Dispose of contents / container according to local / regional / national / international guidelines. Do not eat, drink or smoke during application. Must not be used in rooms in which food or animal foodstuff are gained, produced, stored or sold. Prevent any contamination of soil by the product. ASN: 080111. Registration number in accordance with guidelines 98/8EG: EU-0028968-0000. Authorisation holder: Troy Chemical Company B.V., Poortweg 4C, NL-2612PA Delft,The Netherlands.

Usage and Application
Application/Use
  • The untreated wooden substrate has to be clean, dry and free of dust.
  • Remove layer-forming, old coat.
  • Stir contents well before and during use.
  • Processing temperature (including drying) above + 8°C. Wood humidity < 15%. Air humidity < 60%. Works differently depending on surface characteristics. Apply a trial coat first.

Apply to all sides of the untreated wood by brush, roller, spray nozzle or immersion. Drying takes approximately 24 hours. Protect against water during this period. Drying can take longer on wood with a high amount of wood components. Before using wood treated with Impregnation Primer W219, apply an appropriate top coat.

Durable wood protection for outdoors.

Product Highlights

  • For outdoor use
  • acts against fungi
  • ready-to-use
  • for woods without ground contact