I agree
Our website uses cookies to help provide you with the best experience we can. By continuing to use the website, you agree to the use of cookies. For more information about cookies, please visit our privacy policy.

For outdoors

Special products for protection, care and beautification of wood outdoors.
Durable wood protection for outdoors.

PNZ Insulating Primer

Solvent-free primer coat for wood, cork and plaster. Prevents the bleed-through of wood and cork constituents. Made in the Altmühltal Nature Park.

Suitable for

All interior and exterior woods as well as cork and absorbent substrates (e.g. plaster). As a weatherproof, elastic and moisture-regulating primer coat, Insulating Primer prevents the bleed-through of wood and cork constituents, especially with teak, red cedar, oak, larch and cork as well as with pressure-impregnated wood. The solvent-free, water-based insulation serves in particular as a primer coat for white and light-colored coats. Insulating Primer is also suitable as a masking coat against lindane outgassing as well as insulation against nicotine, grease, soot and water stains.

Color Tones

  • PNZ Insulating Primer - light grey

    light grey

  • PNZ Insulating Primer - transparent

    transparent

  • PNZ Insulating Primer - white

    white

Product Characteristics
Consumption

Approximately 85 ml/m², meaning 1 liter of Insulating Primer is enough for approximately 12 m² per application, depending on the kind of wood and surface (planed or rough-sawn). Corrugated wood can increase consumption (factor 2-3).

Storage

Cool, but frost free.

Cleaning

Clean tools with warm water and soap immediately after use.

Contents

Water, shellac, polymere dispersion, additives, pigments, titanium dioxide, in-can preservatives ( 1,2-benzisothiazol-3(2H)-one (BIT), reaction mixture made from 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (CIT/MIT), / sodium pyrithione; advice for isothiazolinones allergics + 49 (0)8465 173825).

Important notices

Contains 5-chloro-2-methyl-4-isothiazolin-3-one; 1,2-Benzisothiazolin-3-one. May produce an allergic reaction. To avoid skin contact use suitable gloves (nitrile). Wear a dust mask when sanding. Safety data sheet available on request. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read carefully and follow all instructions. Dispose of contents / container according to local / regional / national / international guidelines. ASN: 080112. EU limit for this product (A/e): 30 g/l. This product contains a maximum of 10 g/l VOC.

Usage and Application
Application/Use
  • The untreated substrate has to be clean, dry and free of dust and grease.
  • Remove old, not load bearing coats prior to the treatment.
  • Processing temperature (including drying) above +8°C. Wood humidity < 18%. Air humidity < 60%. Ventilate well during drying.
  • Treat softwood (risk of fungi) in exteriors with an appropriate impregnation primer beforehand.
  • Let dry for at least 1-2 hours between applications.
  • Can be painted over after 24 hours.
  • Stir contents well before and during use.
  • Works differently depending on surface characteristics. Apply a trial coat first.

Apply Insulating Primer by brush or roller. Some substrates might require a second application. Insulating Primer can be painted over with any common kinds of wall paint. Our product appears milky in its container but is the indicated color when dry.

Durable wood protection for outdoors.

Product Highlights

  • For indoor and outdoor use
  • prevents the bleed-through of wood and cork constituents
  • moisture-regulating
  • solvent-free

Color Tones

  • PNZ Insulating Primer - light grey

    light grey

  • PNZ Insulating Primer - transparent

    transparent

  • PNZ Insulating Primer - white

    white