For outdoors

Special products for protection, care and beautification of wood outdoors.

PNZ Wood Oil Varnish

Natural varnish for your exterior wood. Weather- and UV-protection for domestic and exotic wood. Sustainably produced with regional raw materials.

Suitable for

Use as first or refurbishment coat for any wood in exteriors such as windows, window sills, garden houses, facade cladding, timber framing, doors, fences, balconies and garden furniture. Wood Oil Varnish is a transparent, drop reduced, open-pore and UV resistant wood preservative. Our product is nearly odorless, easy to use and penetrates well.

Color Tones

agate silver effect
basalt gray
cedar
chestnut
ebony
gard green
graphite silver effect
larch
mahogany
nordic pine
oak
oak light
onyx silver effect
patina
pine
quartz silver effect
rosewood
stone pine
teak
transparent
walnut
white

Product Characteristics

Consumption

Approximately 40 ml/m², meaning 1 liter of Wood Oil Varnish is enough for approximately 25 m² per application, depending on the kind of wood and surface (planed or rough-sawn). Corrugated wood can increase consumption (factor 2-3). Lower consumption affects durability of the coat.

Storage

Cool, but frost free.

Cleaning

Clean tools with thinner or turpentine substitute immediately after use.

Refined natural oils such as soybean and sunflower oil, isoaliphates, natural waxes, lead-free drying agents, pentanonoxime, pigments.

Important notices

To avoid skin contact use suitable gloves (nitrile). Wear a dust mask when sanding. Safety data sheet available on request. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read carefully and follow all instructions. Only for exterior use. When using multiple containers with different batch numbers mix them together in a bigger container. Do not use the shades “natural” or “transparent” outdoors by themselves as these offer no UV protection. Dispose of contents / container according to local / regional / national / international guidelines. ASN: 080111. EU limit for this product (A/f) 700 g/l. This product contains a maximum of 600 g/l VOC.

Usage and Application

Application/Use

Substrate has to be clean, dry, free of grease and load bearing (roughen old coats).
Sand weathered surface until load bearing wood appears.
Remove contaminants with an appropriate detergent.
Processing temperature (including drying) above + 8°C. Wood humidity < 18%. Air humidity < 60%.
Treat softwood (risk of fungi) in exteriors with an appropriate impregnation primer before applying the first coat.
Works differently depending on surface characteristics. Apply a trial coat first.
Stir contents well before and during use.

Apply Wood Oil Varnish to wood by brush, roller or spray nozzle. The wood is weatherproof after one or two applications with 12 hours of drying in between. Clean open-pore coats and consider roughening them. Then apply as outlined.

Product Highlights

For exteriors
UV-resistant
excellent weather protection
highly water-repellent

Color Tones

agate silver effect
basalt gray
cedar
chestnut
ebony
gard green
graphite silver effect
larch
mahogany
nordic pine
oak
oak light
onyx silver effect
patina
pine
quartz silver effect
rosewood
stone pine
teak
transparent
walnut
white

Related Items

Related Items

Related Items

For outdoors

Suitable for

Consumption

Storage

Cleaning

Contents

Important notices

Application/Use