Product informations - PNZ-BORON-IMPREGNATION
Properties:
Colourless, liquid, ready-to-use salt preparation without exhalation.
Preservative, colourless wood protection agent against wood pests and destructive
fungi for interior and exterior timbers, which do not come in direct contact
with water, for example: roofing beams, square beams, floorboard sub-construction,
stables etc.
Usage:
Remove dirt, rough edges and pieces of bark. Wood must be untreated and absorbent.
To improve the depth of penetration, smooth planed or dry wood (wood moisture
under 15%) should be evenly dampened with water. A trial application is especially
important with oak or exotic timbers.
Stir well before use.
Apply by bushing, spraying or dipping.
When using a brush, apply 1 - 2 coats depending on the nature of the wood.
Should a second coat be required, this should be applied after at least 2 -
3 hours.
The next day:
Moisten with a damp cloth if there is a white layer of crystallised salt.
Boron salts are easily washed off; the treated timbers should therefore not
be exposed to the rain. Retreat subsequent dry cracks with PNZ-BOR-IMPRÄGNIERUNG.
Coverage:
Protection class I: Interior components under permanent dry conditions:
1 litre for approx. 6 - 7 m2 per coat.
Protection class II: Interior components as well us external parts built under
roofing, which are only subject to temporary moisture: 1 litre is sufficient
for approx. 5 m2 per coat.
(Components are wooden materials, which serve as load-bearing or rigidity purposes
in building systems.)
Drying time:
approx. 24 hours.
Storage:
Protect from frost. Shelf life of at least 2 years. Any crystal formation may
be dissolved by heating to 50° - 60°C, e.g. in a hot water bath.
Recommended storage temperature: above 8°C.
Colours:
Colourless
Note:
Store out of reach of children.
Avoid contact to skin and eyes.
Rinse splashes with plenty of water.
Must not be allowed to enter the ground or waterways.
Do not rub down with steel wool before or after applying PNZ-BOR-IMPRÄGNIERUNG,
as the iron dust may result in black colouration. Do not apply on iron parts.
Contents:
Water, sodium borates.
Container sizes:
1 litre, 5 litres, 10 litres, 30 litres, 120 litres
and larger.
|
