Product informations - PNZ-LARCH and CEDAR-OIL, colourless
Properties:
PNZ-LÄRCHEN+ZEDERN-ÖL (PNZ-LARCH+CEDAR-OIL) is an oil emulsion for the protection and care of interior and exterior larch and cedar woods.
PNZ-LÄRCHEN+ZEDERN-ÖL is a pure wood tonic, manufactured from natural, emulsified oils, matched to these special types of wood.
PNZ-LÄRCHEN+ZEDERN-ÖL is weatherproof with good UV stability, solvent-free and open-pored.
PNZ-LÄRCHEN+ZEDERN-ÖL is milky as a liquid, but dries colourless.
The simplest way to weatherproof your wood!
? simple to use
? open pored - moisture-regulating - high UV protection
? non-certified
? non-flammable, ecological
? brushes cleaned with soap and water
Areas of use:
To protect and care for pergolas, fences, carports, log cabins and greenhouses as well as garden furniture and in all other areas in which larch and cedar are used. Abrasion resistance on terrace floors is not guaranteed.
Usage:
Pretreat with PNZ Impregnation Primer if there exists the danger of fungus. Remove soiling with PNZ-GARTENHOLZREINIGER (PNZ-GARDEN-TIMBER-CLEANER). Apply PNZ-LÄRCHEN+ZEDERN-ÖL on the wood. The surface must be clean and free of grease and dust. Working temperature not under 8°C.
Apply PNZ-LÄRCHEN+ZEDERN-ÖL liberally twice or three times, cross-grained wood parts should be coated to saturation. May also be reapplied when dry after approx. 3-6 hours. Drying time: 8?12 hours. The drying time may be prolonged under damp weather conditions. If subsequently treated, PNZ-LÄRCHEN+ZEDERN-ÖL should only be covered with PNZ products. The surface should be refreshed as required. If a coloured coat is required, PNZ-HOLZ-LASUR (PNZ-WOOD-VARNISH) can be used before and PNZ-LÄRCHEN+ZEDERN-ÖL afterwards, which significantly increases UV protection. If, at a later time, a coloured surface is required, PNZ-LÄRCHEN+ZEDERN-ÖL, also with PNZ-HOLZ-LASUR (PNZ-WOOD-VARNISH) or PNZ-HOLZ-WACHS (PNZ-WOOD-WAX), can be applied.
It has different effects on different surfaces. Trial coats are therefore essential.
Coverage:
1 litre for approx. 10 m2 per coat for planed wood.
1 litre for approx. 6-8 m2 per coat for rough woods.
Storage:
Cool and frost-free. Ensure can is well closed.
Cleaning:
Clean tools with soap and water immediately after use.
Colours:
colourless
Note:
When using several containers with different lot numbers, they should be mixed together in a large container!
Contents:
Enhancing natural oils, water and natural emulsifier.
Container sizes:
0.75 litres, 2.5 litres, 10 litres, 30 litres and larger
|
