Product informations - PNZ-WAX-FINISH
Liquid wax care
Properties:
High quality, selected natural waxes and essential oils. PNZ-WACHSFINISH (PNZ-WAX-FINISH) contains no chlorinated solvents and preservatives and no formaldehyde. It does not contain any toxic substances. DIN 50.160 and EN 71.
- acts antistatically and anti-slip ? dirt repellent ? maintains ? protects ? enhances ? keeps surfaces gas permeable ? dries colourless ? no exhalation from the dry film ? serves as a protective foundation and also for subsequent maintenance and cleaning ? anti-friction
Areas of application:
PNZ-WACHSFINISH is used for all heavily used interior wood and cork surfaces (also for those prewaxed during production) linoleum, PVC, plastic coverings, stone-wood, marble, ceramic floor tiles and other solvent resistant surfaces. It is recommended to pretreat untreated floors with PNZ-HOLZ-ÖL (PNZ-WOOD-OIL), PNZ-HARTWACHSÖL (PNZ-HARD-WAX-OIL) or PNZ-OBJEKTÖL (PNZ-OBJECT-OIL).
Usage:
The surface must be sound, free of residues, clean (e.g. oil and grease free) and dry. Dirt can be removed with PNZ-GRUNDREINIGER (PNZ-DEEP-CLEANER). A test application on an area of floor not previously impregnated is recommended.
Apply PNZ-WACHSFINISH thinly and evenly by brushing, with a cotton cloth or mechanically.
Polish as soon as the wax layer is dry (approx. 1 to 3 hours, the surface should no longer be wet shiny). If the surface still shows dull patches after polishing, allow the PNZ-WACHSFINISH to dry better and polish again (white PNZ-PAD) or PNZ-CARE-BOY.
The drying time at around + 20 °C and approx. 55 % rel. humidity is approx. 1 to 3 hours. If dull or worn patches are visible, these should be rewaxed with PNZ-WACHSFINISH and polished immediately after drying. PNZ-WACHSFINISH can also be applied diluted if there is maintenance and cleaning using PNZ-PFLEGEEMULSION (PNZ-CARE-EMULSION) or PNZ-HOLZBODENSEIFE (PNZ-WOODEN-FLOOR-SOAP). If there are smears visible over the entire waxed area, for example, these may be polished away with a white PNZ-PAD or PNZ-CARE-BOY, without the need for waxing.
If required (e.g. if the wax film is partially wiped away), PNZ-WACHSFINISH may be applied after every thorough clean. There should always be just a thin film of wax present.
Repeated impregnation with the required PNZ OILS is possible at any time. Thorough cleaning with PNZ-GRUNDREINIGER (PNZ-DEEP-CLEANER) must be undertaken beforehand in the case of waxed or soiled surfaces.
Please request the PNZ Care Instructions and the relevant technical datasheets for other details on care and cleaning of oiled and waxed floors
Coverage:
1 litre for approx. 25 -30 m2 per coat.
Storage:
Several years for dry storage in the unopened original container.
Note:
VbF (German regulations on combustible liquids): A III
UBA 26010016
Contents:
Dearomatised hydrocarbons and purified natural waxes.
Container sizes:
1 litres, 2.5 litres, 5 litres, 10 litres and larger.
|
